A Bathroom tub or bathtub is a place where we love to pamper ourselves. The system of a bathtub is that it drains water to the sewer tank through the drainpipes, which are connected to the vent pipes. Vent pipes are responsible for expelling the sewer gases out of the roof. A bathroom tub has a U-shaped pipe which contains water, and this prevents the sewer gas coming to your house. They are one of the difficult plumbing systems at your home. As they are continuously used over a period of time, sometimes they might break down and cause leakage. Here is an analysis of a few common problems with bathtubs and how to fix them –
Dripping tap in the middle of the night
Suddenly you hear a dripping of water sound in the middle of the night which disrupts your sleep. When you enquire you found the water is dripping from your bathroom tub faucet. You might notice a water line stain around the bottom of the faucet and you will find the water force is weak even though the tap is running at full speed.
Usually, three types of bathtub faucet are in fashion-the Compression faucet and the ball or washer-less faucet. When it comes to the dripping of water from the compression bathroom tub faucet, the problem might be caused with the washer. A damaged washer is the possible cause of water dripping from your faucet. When the washer is damaged, it is unable to provide a seal tightly around the tap, which ultimately causes the water to pass through. Another reason can be the staining of water around the bottom of the bathtub faucet, caused by the leaking of washer downwards.
As a solution to this, you just need to replace the washer. Take out the faucet with a screw and find the damaged washer. After replacing put the faucet back on the top of the washer. Tighten it properly so that it provides a strong sealing on your faucet.
However, when it comes to the dripping problem of the washerless bathroom tub faucet, you might require a professional plumber. It involves difficult steps and only an expert can perform those steps. This happens because of overuse of faucets.
Bathtub Faucet Clog
Clogging in the bathtub faucet is a frequent problem occur every now and then. The symptoms of a blockage can be the weak flow of water, dirty water coming from the tap, and sometimes unusual sound in the faucet.
The fixing of this bathtub faucet clog will involve a lot of work and you must contact a professional for this. This is not like a toilet clog which requires minimum intervention. You will have to move down the pipe to unscrew them and see what has happened exactly.
It is very normal for you to find deposits inside of the pipes which are preventing the debris from being flowing up to the tube and out into your bath. The mesh screen attracts a lot of dirt after being used for years. The situation worsened if you live in a hard water area. First, the top of your bathroom tub faucet needs to be removed, and you need to take out the mesh. Wash it properly in hot water with some detergents. When you finish cleaning the mesh, put the bathtub faucet in place and turn it on in full force. You will see the water flow is coming in a proper manner.
Bathroom tub drain clog? one of the common problems with bathtubs and how to fix them
When a bathroom tub drain is clogged, you should check all other fixtures at home including the toilets, sinks and others to see if they are also releasing poor water flow. When you see other fixtures are also giving you the same treatment, then the problem will be in the branch line where they join each other. To treat this situation, you must call a professional.
If only the bathtub is clogged, then it is caused by the branch drain. Deposits of hair and debris are most likely the reason of this.
You can use a coat hanger and clear out the blockage in the bathroom tub drain with its small hook on one end.
If it does not work, then you should use a chemical drain cleaner. However, you must be careful while using chemicals as some of them are not suited for pipes and can break them and can disrupt the whole sewer system balance.
Another thing you can use is a flat drain plunger, you can plunge the clog and try to break it. You can continue plugging it up and down for about 15 minutes with full force. Make sure it is properly sealed against the fixture.