Most common causes of leaky faucet

Common causes of leaky faucet
credit image cf.nearsay.com

The faucet is something which we use frequently, it is an indispensable part of our lives. Keep them in good condition will help us to perform our day to day task effortlessly. A leaky faucet disrupts sleep whether it is in the kitchen, bathroom or outside a home. The sound comes incessantly at night and we cannot sleep peacefully. A leaky faucet is an annoying problem every one of us has experienced in our lifetime. It happens when water sediments accumulate and cause corrosion in the valve seat and it results in the leakage around the spout area. A professional plumber performs the cleaning of the valve seat and if you clean them at frequent intervals, then this leaky faucet problem will not occur. Sometimes the problem may present in the washer. It may have worn out over repeated use and then it causes dripping faucet.

A leaky faucet causes a huge amount of water loss and it is a serious issue to be addressed when there is an awareness for water conservation globally. The common causes of leaky faucet includes the following-

Problem in the O ring

A certain kind of screw is required to hold the handle of a faucet in place and this screw has a small disc called 0 rings and this sometimes causes the leaky faucet.

Problem in the O ring

credit image
http://diy.sndimg.com

It happens because of the 0-ring loosened out after repeated use. Replacement is the option here, this is a problem typically present in cartridge faucets.

Corroded Valve Seat

A valve seat is something which establishes the connection between the faucet and the spout. Over time because of water sediments get accumulated in the valve makes it prone to corrosion. This causes leakage around the spout area and causes the dripping faucet condition. To prevent this to happen, you should clean the valve seat at regular intervals through a professional plumber.

Washer is old

A defect in the washer is one of the common causes of leaky faucet. Every time you use the faucet, the washer is pressed against the valve seat, and because of the frequent pressure, the washer wears out over time. As a result, you will see water is dripping in the spout area. The defect in rubber washers also causes dripping faucet problem and replacement is the right solution here.

Washer is old

credit image
i.pinimg.com

Washer is not installed properly

Sometimes the problem of leaky faucet occurs because either the washer is not correctly fitted into the system or it is not the right size which is accommodated. Therefore, always seek the help of a professional when you install the washer, otherwise, you will face frequent dripping faucet problem.

Parts of the faucet get loosened

Because of repeated use, the ring and the packing nuts in the faucet may get loosened and cause the dripping faucet. If you find out the leakage is originating from the handle, then you can either tighten it or replace it. Due to continuous usage, the adjusting ring and packing nuts in the steam screw may become loose, causing leakage near the handle of the faucet. If there is leakage from the handle, either you need to tighten the packing nut or completely replace it to get rid of this dripping faucet problem.

Old seals are a cause of leaky faucet

Because of the tearing out of the Inlet and outlet seals, sometimes the dripping faucet happens. Water sediments get deposited in these major parts of disc faucets, which causes the seals inside the assembly to wear out. The cleaning out of water sediments can also be performed by a plumber and thus you can ensure the faucet mechanism functioning properly. Replacing the seals will enhance the performance and the leaky faucet problem will stop.

Pipe is broken

Though rare, sometimes the dripping faucet is caused by a broken pipe. The cracks present in the broken pipes will restrict the normal flow of water and cause the faucet to drip at frequent intervals.

You might also like

3 Comments

  1. 1

    The RCA Outdoor Yagi Satellite HD Antenna is an affordable option that doesn’t compromise on performance. With a range of up to 70 miles, it’s suitable for rural areas with weak signals. Its rugged construction and compact design make installation easy, and its ability to receive both digital and analog signals ensures a wide range of channels. click reference

  2. 2

    Knowing what is wrong with your piping system is extremely important to any homeowner, but it is important that you let professionals handle the repair; though it may seem cheaper to do it yourself, inexperience may lead to further problems in the future due to mistakes in reassembling or failing to spot any issues, which could lead to long term problems in your piping system. This is why Clover Services can be a big help; they provide preventative maintenance, ensuring you do not get any piping problems in the future, above any repairs your piping system needs, which can ensure the safety and longevity of your pipes, which can save you from the hassle and stench of trying to solve a leaky or clogged pipe.

  3. 3

    Home improvement is a very necessary thing and there are many other things included in this. This involves, various fitting and plumbing services in the kitchen, bathroom and other places. Thank you. You are doing a great work by sharing this.
    Leaky faucets Chattanooga

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>