An inverter is an essential appliance which is present in almost all homes and offices across the world. This device powers our essential appliances in case of power cuts by providing back up. Inverters run on batteries which need to be maintained properly along with the rest of the unit. If not, then there are certain problems that can crop up in these devices. One of the problems which many inverter users report is inverter beeping continuously. The following are the possible causes and solutions for inverter beeping continuously that might prove useful.
1. The inverter is operating on battery power
REASON: One of the common reasons for inverter beeping continuously is it running or operating on battery power. The beeping or alarm basically points towards the fact that the unit is transferred from on line operation to battery operation.
SOLUTION: In this situation, the battery power supplied outlets have now become battery powered.
2. The inverter is in low battery condition
REASON: Another reason for the beeping sound could be an alarm for low battery. This means the device may soon turn down and is an indication for you to charge the battery. In order to protect the device’s batteries from discharging too much, the inverter will be forced to shut down. Generally, the alarm rings for 2 minutes before shutting down but this time period can be changed too.
SOLUTION: In order to stop the beeping sound or alarm, you must recharge your inverter as soon as possible. This might take a few hours time.
Image Credits: YouTube.com
3. Capacity overload
REASON: Another common cause for inverter beeping continuously is capacity overload. If the device is in overload condition then you will hear the alarm and must remove the non essential equipment. The alarm will keep ringing until you remove the extra load.
SOLUTION: You must try and buy an inverter of the right size and capacity to avoid the beeping issue due to overload. Else you can also try removing some extra load of possible.
Some of the other best selling Inverters available online are:-
- Luminous Zelio 1700 Inverter with Red Charge 18000 150 Ah Tubular Battery
- Luminous Zolt 1100 Inverter + RC 25000 200 Ah Tall Tubular Battery + Trolley
4. Inverter must have failed a self test
REASON: Though not common, but a possible reason for the beeping could be that the inverter must have failed a self test. Most inverters perform a self test every 2 weeks to check the integrity of the battery. If it fails in the test then this means that the battery may be near its end and needs to be replaced.
SOLUTION: This means you must replace the battery within the next 2-4 weeks.
In case you are looking for a new Inverter Battery, we have some more recommendations for you:-
These were the top most common reasons for inverter beeping continuously. Well if you are someone who is facing the same problem, then you must try and find a solution based on the above given causes. However each beeping sound is different and indicates a different issue. For example, continuous beeping indications battery being too low whereas a constant solid beeping tone is an indicator of capacity overload. Thus you may need to learn the various tones and their meanings to find a quick resolution of the problem. If you wish to contact a professional to help you with inverter noise problem, you can reach out to Mr Right.