Iron press not working? Here are the common causes and solutions

dry iron problems
Image Credits: Wikipedia

Iron press is a commonly used home appliance which helps you iron our clothes at home. This device comes in many variants and a lot of companies manufacture it. While it is true that it hardly ever encounters a problem, there are some cases where it may become faulty or some or the other part of it may start showing issues. One of the major issues that may crop up is iron press not working. Ofcourse, in this situation the appliance becomes redundant. If you too are facing the issue of iron press not working then the following given causes and solutions shall prove useful.

1. Fuse may be blown

CAUSE: One of the most common reasons for iron press not working could be a blown fuse. In some cases when the fuse of the iron press burns or blows, then it may stop working altogether. This is why it is important to resolve the issue fast.

SOLUTION: If this is the case, then the only solution for this is to get the fuse checked and then replaced by a professional.

fuse of steam iron

Image Credits: siddhantk11.blogspot.com

2. Check all the power cables

CAUSE: If there is an issue with even a single power cable then the situation of iron press not working may arise. Faulty or loosely attached cables may cause technical problems and may not let the appliance work.

SOLUTION: Thus for ensuring that all power cables are working fine or to know which one is not, you must open the cover at the back of the iron and then plug it in. Make sure you follow safety measures so that you are not electrocuted.  Check that the cables from the socket on the wall all have power. You can use a multimeter to check for the continuity of the cables to ensure the same. If there is an issue with the cables, you must get them replaced.

iron cables

Image Credits: YouTube.com

3. The heating element may be faulty

CAUSE: Another possible cause of iron press not working could be a faulty heating element.

SOLUTION: To check this, use a multimeter and check for continuity in between the ends of the heating element. If you observe that there is no continuity then the element is dead and there is no option but to get a new iron for yourself.  But in case it has continuity then you must check the continuity of the other components connected in series along with the element.

heating element

Image Credits: rougeriverworkshop.blogspot.com

4. Faulty thermostat

CAUSE: Another reason for iron press not working could be a faulty thermostat.  Thermostat is that part of an iron which controls the temperature and senses if the temperature is going to high to cut off the heating.

READ ALSO:  Most common steam iron problems and their solutions

SOLUTION: Try rotating the thermostat dial to different settings and check the change in heating. If you find that there is no change or the dial isn’t working properly then the thermostat may be faulty. If the thermostat is faulty, then you can get it replaced easily.

faulty thermostat

Image Credits: YouTube.com

Besides these common causes for iron not working, you must also ensure that the device is tightly plugged in the power supply. It is great if you can check the reason for the fault on your own but for certain things like replacement of parts, you may need to contact professionals. You can contact Mr Right for any iron related issue such as iron not working among others.

 

You might also like

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>