Geyser tripping main switch: causes and solutions

Shipra Mangla

7 years ago

The geyser in your bathroom or kitchen is definitely one of the most important home appliances there is. Not just it heats water for your bathing needs but also for various other purposes such as washing utensils, cooking food and many others. But geysers can encounter certain problems from time to time which may be solvable but can create temporary problems. One of such issues is geyser tripping main switch. There can be many reasons for this and the solution will depend upon the cause. Thus we have listed the main reasons for geyser tripping main switch as well as the solutions:

1. Water dripping on the electrical lines

REASON: One of the most common reasons for geyser tripping main switch is water dripping on the electrical lines. It is a fact that a leak which allows water to drip on or contact with any electrical parts or components can prove to be dangerous. This leak can be caused due to a failing gasket which must be repaired.

SOLUTION: It is suggested that you contact a professional for repair purpose as it can prove risky to do this on your own.

2. A malfunctioning thermostat

REASON: Another common cause for geyser tripping main switch is a malfunctioning thermostat. Thermostat is an important part of the appliance. It helps you control the temperature of the water that the geyser heats.

SOLUTION: If it becomes faulty then it is important to replace it, especially in the case of tripping of the circuit breaker. In this case it may be a good idea to replace the heating element as well. You can check the functioning of the thermostat through a multimeter.

Our Pick

HTC Instrument Mas 830L

Digital Pocket Multimeter Dmm

Features: 3½ digit LCD display with backighting data hold transistor and amp

Here are some other Multipurpose Multimeters your can find online:-

3. Burnt out heating element

REASON: If none of the above given points are not the reasons for your geyser tripping main switch, then the possible cause could be burnt out heating element. Most geysers have two heating elements-one at the top and the other at the bottom. When the heating elements fail, they simply burn out and the best way to detect this is when you observe that the water isn’t as hot as it used to be. In some cases, the heating element casing may split up and may expose the electrical components directly to the tank or water. This may result in the short circuit flipping the high limit switch on the geyser and result in tripping of the main switch.

SOLUTION: The only solution here is to replace the heating element altogether.

Our Pick

Airex Copper Cup Type Geyser Heating Element Midget

Instant Water Heater (Heating Coil) 3000W

Includes: 1 Unit Of Copper Cup Type Geyser Heating Element (Midget)/Instant Water Heater (Heating Coil) 3000W built with Copper

Some of the other Heating Elements available online are:-

4. Poor electrical wiring

REASON: Another common reason for geyser tripping main switch could be poor electrical wiring.

SOLUTION: If a wire has become loose in the electrical panel then you must contact a professional to get the electrical wiring changed or replaced.

Image Credits: Wikimedia Commons

Now that you know the main causes of geyser tripping main switch you can easily solve the issue with the solutions suggested. However for any kind of professional help or replacement work, you can contact Mr Right. They can help you with general home appliances repairs or any geyser related troubles.

Our Pick

Bajaj Splendora 3L 3KW IWH Instant Water Heater

Corded Electric Water Geyser

Copper heating element with efficient longer life. Unique Weldfree joint in outer metal body. It come with fire retardent cable and neon indicator for heating

If you are looking for a new Geyser, we have some recommendations for you: –