A ceiling fan is one of the most underestimated appliances in our homes and offices. They provide us with cool air throughout the summer months but most of us fail to consider them and look after them like other appliances. Due to lack of maintenance, a ceiling fan can encounter several problems and one of them is ceiling fan not spinning. If you too are facing the same issue, then the following given troubleshooting tips on how to fix a ceiling fan that won’t spin, might prove useful.
1. Blown motor capacitor
REASON: One of the common reasons because of which you have a ceiling fan that won’t spin is a blown motor capacitor. The motor capacitor may simply burn out due to either overheating or age. If you have been using the fan for a long time, then the chances of this may increase.
SOLUTION: The only solution for this is to replace the motor capacitor either yourself or by contacting a professional. In order to check the capacitor, you must first remove the motor housing. The capacitor is basically a little black box which is connected to the pull cord. You will be able to detect the blown capacitor just by looking at it as it will seem melted or burnt.
Wadoy CBB61 5 Wire Ceiling Fan CapacitorCompatible with NEW TECH 5+5+5uf 50/60Hz 250VAC
Rated Capacitance: 5+5+5uf ;Max Temp:+ 70 ℃
Tolerance/Rated Frequency/Voltage:50/60Hz 250VAC C± 5%
Size: 47X28X27(LXHXW) mm
Our other recommendations:
- LONYE 5 Wire Ceiling Fan Capacitor Replacement for NEW TECH CBB61 250VAC 50/60 Hz 4.5 + 6 + 6μF
- New CEILING FAN CAPACITOR CBB61 4.5uf + 6uf + 5uf 5 WIRE 250V
2. Broken flywheel
REASON: Though rare, one of the causes of a ceiling fan that won’t spin is a broken flywheel. In some of the models of ceiling fans, the blades are attached with a rubber flywheel rather than the motor itself. Due to constant usage and over a period of time, the flywheel may become weak and brittle. This may cause it to break. In such a situation, the motor would still be working or running but the blades may not be spinning.
SOLUTION:The solution in this case is replacement of the flywheel. This should be done through a professional.
3. Frozen bearings
REASON: Another common reason for a ceiling fan that won’t spin is frozen bearings. The bearings present inside the motor may have got stuck or frozen which may thus not be allowing the blades to spin. Even if you push the blades by hand, they won’t move if this is the cause or case.
SOLUTION: It is true that bearings can be replaced but it is recommended to change or replace the fan altogether for better results.
4. Check the power
REASON: Sometimes power failure or problem with the power button could be the reason for a ceiling fan that won’t spin.
SOLUTION: Thus you must make sure the fan is receiving power to function. You can either use a multimeter to check for continuity or call an electrician to help you check the power.
Now that you know the various reasons and solutions for a ceiling fan that wont spin, you can solve the issue on your own. But if you have no previous experience with electrical wires or connections, then it is better to take help of a professional. Contact Mr Right services for ceiling fan installation or repair.