Site icon Ideas by Mr Right

Why does my microwave runs for a few seconds and stops? Five possible reasons.

Divya Mishra
Microwave not working

If your microwave runs for a few seconds and stops, then you should check for these 5 possible causes:

1. Faulty door switches

There are door switches in a microwave which must be sealed tightly for the microwave to operate properly. If the microwave runs for a few seconds and then shuts off, the door switch might be defective or loose. Sometimes arching or overheating of door switches stops microwave from running efficiently. Some microwaves have a seal or gasket around the door. If the seal or gasket is broken, microwave shuts down. If your microwave is giving you such trouble call a professional for microwave repair.

Our Pick

LONYE SZM-V16-FD-63 Microwave Oven Door Micro Switch

Microwave Oven Door Switch replacement

Commonly found in microwave ovens, this switch will close the circuit once the button is depressed. This switch may be used in many other appliance

Here are some of the other recommended microwave door switches that you can replace yourself:

  1. LONYE W10727360 & W10269458 & W10269460 Microwave Switch Replacement for Whirlpool Microwave SZM-V16-FC-61 SZM-V16-FC-62 SZM-V16-FC-63
  2. KW3A Microwave Oven Door Switch 16A 125/250V Door Interloc(Normally Open & 3 Insert Foot)
  3. Microwave Door Switch SZM-V16-FA-63 by Podoy Compatible with LG GE Starion WB24X829 3B73362F PS3522738 SZM-V16-FD-63 AP2024337

2. Defective touch-pad or control panel

Some microwave models have knobs and dials while others have touch-pads. Microwaves with touch-pads are technological advanced but sensitive compared to the ones with knobs. So if your microwave stops suddenly then there might be a short in the touch-pad control panel.

Our Pick

GE WB56X10822 Genuine OEM Control Panel Assembly

for GE Microwaves

GE Appliances WB56X10822 Microwave Control Panel Assembly houses the selection buttons and display for the microwave

Our other recommended replacements:

  1. GE WB56X10826 Touchpad and Control Panel
  2. Samsung De94-02517c Assembly Control Panel

3. Malfunctioning voltage transformer

There is a high voltage transformer in a microwave that produces high voltage to charge the magnetron. Upon charging the magnetron emits radio-waves which travels through the wave guide and enter the food area to cook or heat your food. If the microwave runs for a few seconds and stops, the high voltage transformer might have got a sudden short in its circuit. Call a professional for microwave repair.

Our Pick

LG Electronics 6170W1D052Z LG LG-6170W1D052Z Transformer

genuine OEM part manufactured to exact specifications

Replacement LG brand Microwave High Voltage Transformer sends power to the magnetron and capacitor for heating the contents of Microwave

Our other recommended replacements:

  1. LG Electronics 6170W1D052Z Microwave Oven High Vol 5304479021 Microwave High-Voltage Transformer Genuine Original Equipment Manufacturer (OEM) Part
  2. Samsung DE26-00126B High Voltage Transformer

4. Faulty cooling fan

There is a fan inside microwave that runs to keep magnetron and other circuitry items cool. So if the microwave starts but the fan does not turn on, it may stop automatically for safety reason.

Our Pick

Lg EAU42744409 Microwave Cooling Fan

genuine OEM part manufactured to exact specifications

Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged

5. Clogged vent

Microwave also has an air vent to keep it cool. If this vent gets clogged with grease and dust, the microwave will not operate properly. Microwave will shut down automatically for safety reason. So clean the vent with a brush to prevent this problem.

Other reasons that your my microwave runs for a few seconds and stops may be burned internal fuse or defective diodes or faulty capacitors. Call a professional for diagnose and problem resolution for your microwave
Exit mobile version