Causes and solutions for an overheating geyser

geyser
Image Credits: Wikimedia Commons

Getting extra hot water from the taps could be a serious problem for homeowners. Not only does this mean getting undesirably high temperature water when not required but also poses risk of burns and injuries.  Moreover this can also result in pressure problems inside the hot water tank.  A geyser is not a very complicated device and identifying the causes for an overheating geyser is easy. This article talks about both the causes as well as the solutions for an overheating geyser. Read on to find out.

Check the temperature setting on the thermostat

CAUSE: Wrong temperature settings on the thermostat can be one of the reasons for an overheating geyser.

SOLUTION: The first thing you need to do to check the cause of an overheating geyser is to inspect the temperature setting on the thermostat. Most modern day geysers have a thermostat with a dial to control the temperature.  120 degrees is sufficient for the needs of most of us.  Check if the setting is more than that as this can be a possible cause of an overheating geyser. Lower it down and check whether the issue has been resolved.

geyser thermostat

Image Credits: alibaba.com

Check the elements

CAUSE: In most water supplies around the world, there is presence of minerals which do not get removed even during the purification process.  Warming the water can lead to these minerals clumping together and settling on the bottom of the water tank.  This means they tend to get coated on the water heater elements present in the geyser.  Due to this the geyser has to work harder to heat water and this sometimes results in overheating of the elements and thus the water.

READ ALSO:  Types of water heater or geyser available in market

SOLUTION: If this is the case, then you may have to replace the heating element as it may have burned out.

geyser overheating

Image Credits: Wikimedia Commons

Problem with the thermostat

CAUSE: Besides a higher temperature setting, you may also be facing problems with your thermostat which may be causing overheating of the water.  If the thermostat is faulty or defective, it won’t show a red light sign which is usually an indicator that the water has warmed up. Thus you do not get to know if the water has heated beyond your needs and hence this results in you getting overheated water.

SOLUTION:  Thermostats can easily be replaced and if this is the case, then you must get yours replaced to resolve the issue.

check thermostat

Image Credits: YouTube.com

Problem with the pressure release valve

CAUSE: Another possible cause of an overheating geyser is problem with the pressure release valve. If your pressure release valve has failed or stuck up then it won’t allow steam to release or escape when the unit has overheated.  This could lead to damaging of the tank and may even cause accidents and injuries to homeowners.

SOLUTION: If you hear boiling sounds from the geyser, then it is advisable to contact a plumber or technician as soon as possible to solve the problem.

pressure relief valve

Image Credits: YouTube.com

Overheating geysers are not just problematic but also risky and they must hence be checked and repaired as soon as you observe the issue. You can contact professionals to help with geyser heating or if geyser does not heat etc  by reaching out to Mr Right.

You might also like

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>