7 important guidelines for split AC installation

Window AC uninstall

The installation of the split air conditioners is a crucial job. If the installation is done accurately your air conditioner will give optimum cooling, but if it is not done properly you won’t get the desired cooling effect. A poor installations also leads to frequent maintenance problems.

Several factors have to considered during the installation of split air conditioner.

1. Strength of wall to hold the AC

The indoor unit of split AC must be installed on a wall strong enough to hold the unit’s weight.

2. Proper spacing between wall and AC unit

The indoor unit of split AC requires at least 15 cm of open space surrounding its top and sides for proper air flow.

3. Appropriate installation height from ground

Mount the indoor unit of split AC at a height of 7-8 feet above the ground for adequate cooling inside the room

4. Correct tilt angle of indoor unit

While fixing the aluminum bracket on wall make sure that the bracket is given a slight tilt angle, so that the indoor unit of split AC, when fitted is also at a slight angle to enable unrestricted flow of the condensed water from the drain pipe.

5. Correct location of outdoor unit

For proper cooling, mount the indoor and outdoor units of split AC at location away from direct sunlight and water. Install the outdoor unit of split AC in open space so that there is no hindrance to the heat dissipated from the condenser.

6. Proper placement of outdoor unit

The outdoor unit of split AC must be placed on a flat and rigid surface. This unit contains key components of split AC like compressor, condenser, fan motor etc. If the unit is not on a flat surface then it will vibrate excessively, which can lead to the breakage of copper pipes, coolant leakage and compressor/condenser damage. Further, the vibrating unit makes lots of noise which could disturb you and your neighbors.

Recommended Out Door Unit Stands available online:-

Our Pick

7. Right distance between indoor and outdoor unit 

Correct distance between the indoor and outdoor unit plays a very important role in cooling. The coolant at very low temperature flows inside the copper tubes between indoor and outdoor units of split AC. There is always some loss of cooling effect to the atmosphere when the refrigerant flows between the units. Hence to reduce this loss, keep the distance between the indoor unit of split AC and the outdoor unit of split AC as minimum as possible. The maximum allowable distance between the indoor and the outdoor units of split AC can be about 15 meters.

Our Pick

A good quality Copper Pipes are always recommended for AC Installation. Here, we have some recommendations for you:-

Our Pick

We also recommend these other AC Covers to keep your AC dust free when not in use:-

You might also like

169 Comments

  1. 1
  2. 2

    When installing a split AC, follow 7 essential guidelines for optimal performance. Ensure proper placement for efficient cooling and airflow. Position the indoor unit at a suitable height, away from direct sunlight or heat sources. Use insulated copper pipes for refrigerant flow. Trust an experienced ebook writing company for detailed installation instructions.

  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

    La decoración de las habitaciones infantiles se vuelve un viaje creativo con los encantadores vinilos decorativos. Estos adhesivos de vinilo para bebés no solo transforman las paredes, sino que también infunden un toque mágico en la vinilos para tiendabebés. Desde vinilos con nombres infantiles hasta adhesivos originales infantiles, la variedad de opciones permite personalizar el espacio según los gustos del niño. Comprar vinilos infantiles se convierte así en una experiencia única, donde cada elección refleja el amor y la atención dedicados a crear un ambiente especial. Los vinilos para niños ofrecen versatilidad y adaptabilidad, siendo una opción decorativa que crece con el pequeño. Los padres pueden elegir vinilos decorativos habitaciones infantiles que estimulen la imaginación y el desarrollo cognitivo, transformando la vinilos para niños en un rincón lleno de colores y formas.

  8. 8

    Proper Location: Select an optimal location for the indoor unit, considering factors like room size, furniture placement, and airflow requirements.

    Correct Mounting Height: Install the indoor unit at an appropriate height on the wall to ensure efficient air distribution and easy maintenance access.

    Secure Mounting: Ensure a sturdy and level installation of both indoor and outdoor units to prevent vibrations, noise, and potential damage.

    Adequate Clearance: Provide sufficient space around the indoor and outdoor units for proper airflow, maintenance, and optimal performance.

  9. 9

    Gateway Express Clinic is committed to providing a wide range of healthcare services that place your well-being at the forefront. As the primary care physicians at Gateway, we are proud to offer patient-centered care in a welcoming and convenient environment. Your health is our top priority, and we eagerly anticipate the opportunity to serve you with both professionalism and compassion. For more information Please visit our website :https://gatewayexpressclinic.com/primary-care/

  10. 10
  11. 11
  12. 12
  13. 13
  14. 14

    PRGMD is a trusted name among Medical Billing Audit Companies. Our dedicated team and advanced technology solutions ensure accurate and efficient billing practices for healthcare providers. Discover how we stand out in the world of medical billing audit companies by visiting our website today. our site: https://prgmd.com/medical-billing-audit-usa/

  15. 15
  16. 16

    Explained the intricacies of HVAC systems beautifully, making it easy for readers to understand the importance of proper heating, ventilation, and air conditioning for optimal indoor comfort and air quality. Kudos to the writer for breaking down complex concepts into digestible information

  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>