7 Common problems with split AC

split ac problems

Here, are some of the common problems faced by people using split AC.

1.Refrigerant leakage in split AC

split ac gas leakage

Leakages are one of the most common split AC problems. The refrigerant (AC gas, as commonly known) is main contributor to the cooling of the air. If the split AC is not cooling properly, most probably the refrigerant level is low. Since the refrigerant is stored at very high pressure, all the curves and joints in the copper pipe are under constant stress. Due to humidity and other corrosion-causing compounds in the atmosphere, these copper pipes may get weak and develop leakage holes. In many cases, this leakage gets developed in the flare nut located at the outer AC unit. Repairing for leakages problems is fairly simple. Just make sure that the repair technician doesn’t over-charge or under-charged refrigerant as it can damage the AC.

2. Compressor switching off too frequently

split ac compressor problem

In this case, most likely the filter of the split AC is choked due to heavy accumulation of dust and debris. Due to this, the AC works even harder to intake air for circulation, thus increasing the temperature of the AC above ideal operating temperature. Resulting in cutting off of the compressor. So, just take out the filter and wash under tap water. Do this monthly and you shouldn’t have any issues.

3. Ice accumulation on cooling coil

ice formation in split ac

When the level of refrigerant is less than the required amount, the temperature of cooling coil drops much below the normal. Due to this phenomena, the moisture in the room condenses on the coil and freezes. To rectify this issue of ice formation on AC, call an AC repair professional as he will be able to accurately determine if the refrigerant level is just right in the cooling coils. For more on ice formation inside split ac follow this link: Why has ice formed on my air conditioner?

4. Foul smell upon switching on the AC

clogging in ac drain pipe

Sometimes when you switch on the split AC, it emits unbearable odours. Don’t worry, the problem lies with the drainage system of the AC. Due to dust and debris inside the drain pipe and drainage tray, water gets accumulated and slowly starts smelling bad. Just get the repair technician to clear out the drainage system and the problem should be solved.

5. Split AC not starting

Well in this case, most likely the PCB of the AC unit is at fault. There’s no specific reasons to why the PCD has failed. It can be due to surges in current, too frequent ON-OFF cycles, physical damages etc. In cases where ICs or capacitors have burnt, only option here is to replace it. If the damage is more, the whole PCB has to be changed, which can be expensive depending upon the technology used in the split AC.

6. Indoor unit making too much noise

split ac fan

Sometimes the indoor unit of the split AC starts making too much noise while operating or just during start-up. The problem is actually small so don’t worry. The fan present inside the indoor unit is at fault here. With usage the fan gets disbalanced, the technician will just dismantle the indoor unit and arrange the fan into its original place. In some cases, the noise is due to accumulation of dust and dirt on the fan which causes vibration in the fan. Dismantling and cleaning the fan will do the trick here.

7. Swing mechanism not working

split ac swing

If the swing function on the split AC is not working, there can be 2 reasons for this. The swing is controlled by separate swings motors. Either the PCB is not sending current to the motors or motors have a problem.

Our Pick

If you’re considering getting a new AC, do take a look at these amazing products available on Amazon.in:

  1. AmazonBasics 1.5 Ton 5 Star 2020 Inverter Split AC (Copper Condenser, Advanced Motor, White) 
  2. Carrier 1.5 Ton 5 Star Inverter Split AC (Copper ESKO NEO HYBRIDJET INV R32CAI18EK5R39F0 White) 
  3. LG 1.5 Ton 5 Star Dual Inverter Split AC (Copper, KS-Q18HNZD , White, Hi Grooved Copper)
  4. Daikin 1.5 Ton 5 Star Wi-Fi Inverter Split AC (Copper FTKR50TV White) 
  5. Godrej 1.5 Ton 5 Star Inverter Split AC (Copper GIC 18HTC5-WTA White) 
  6. Voltas 1.5 Ton 5 Star Inverter Split AC (Copper 185VSZS White) 

If you’re a DIY person, we have some recommended tools and equipment for you:-

Our Pick

Best Tool Kits

  1. Bosch GSB 550 Mechanic Kit Professional 
  2. iBELL IBL TD13-100, 650W Professional Tool Kit Pack of 115 with 6 Months Warranty 
  3. STANLEY STMT82672-0-12 Chrome Compact Socket Set, 1/4″, Silver (37pcs)
  4. Grizzly 46 In 1 Pcs Tool Kit & Screwdriver and Socket Set 

Multipurpose Multimeter

Our Pick
  1. Techtest Xl830l Pocket Digital Multimeter with Battery 
  2. SCHOFIC Digital LCD Pocket Multi Meter/AC-DC Voltage/with Back Light (Yellow) 
  3. R-tek 830L 3 Digit, 600 AC/DC Voltage Digital Multimeter with Back Support and Back Blue Light 
  4. Unity Digital LCD Pocket Multi Meter/AC-DC Voltage/with Back Light (Yellow) 

For further queries please feel free to comment in the section below.

Image credits

www.myazac.com
alicdn.com
www.team-bhp.com

You might also like

35 Comments

  1. 1
  2. 2
  3. 3

    Coolbreezehq is a game-changer in the world of online marketing, an all-in-one platform that allows businesses to get a comprehensive view of their website’s performance and make informed decisions. a fantastic read

  4. 4

    Hi, Experience optimum system performance and maintain a healthier environment by prioritizing regular cleaning and filter changes. Eliminate the risk of dust, dirt, or mold accumulation that can compromise your system’s efficiency. Safeguard your investment by staying vigilant for leaks or blockages that can wreak havoc on your system. Don’t forget to schedule an annual inspection with a skilled HVAC technician, ensuring your system remains trouble-free.super general ac

  5. 5

    My split ac not working properly, after half hours it’s cut the cooling and showing yellow light blinking, when i cutoff and on main switch it will start again through remote then half hour working good and after that repeat same problem
    My AC (Panasonic ac 1tn).
    Kindly suggest the problem and solution

  6. 6

    My AC is not working properly
    The problem is when we switch off the AC the the swing doesn’t close ,it will struck in middle
    And if we switch off and on the stabilizer then the swing closes completely.
    So, what should I do

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>